 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NTE3001 Light Emitting Diode Miniature, Diffused Red Description: The NTE3001 is a diffused Gallium Arsenide Phosphide diode mounted in a two lead epoxy package with a red diffused lens. On forward bias, this device emits a spectrally narrow band of visible light which peaks at 660nm. The NTE3001 is intended for high volume indicator light applications where low cost, high reliability, and top performance are required. Major usage is in applications such as diagnostic lights on printed circuit boards and panel lights. This device can be used to displace subminiature lamps as small as T3/4 size. Features: D Low Cost D Bright D Compatible with Integrated Circuits D Long Life, Rugged D Small Size: T-3/4 D Easily Assembled in Arrays Absolute Maximum Ratings: Power Dissipation (TA = +25C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80mW Derate linearly from 25C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.6mW/C Forward Current Continuous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40mA Peak (1sec pulse width, 0.3% duty cycle) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.0A Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0V Operating Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55 to 100C Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55 to 100C Lead Temperature (During Soldering, 5sec max, Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +230C Typical Thermal Characteristics: Wavelength Temperature Coefficient (Case Temperature) . . . . . . . . . . . . . . . . . . . . . . . . . . 0.3nm/C Forward Voltage Temperature Coefficient . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -2.0mV/C Note 1. The leads of the device were immersed in molten solder at +230C to a point 1/16 inch from the body of the device with a dwell time of 5 seconds. Electro-Optical Characteristics Parameter Luminous Intensity Peak Emission Wavelength Spectral Line Halfwidth Forward Voltage Capacitance Rise and Fall Time Reverse Current View Angle Test Conditions IF = 20mA, Note 2, Note 4 IF = 20mA IF = 20mA IF = 20mA V=0 50 system, IF = 20mA VR = 3.0V Between 50% points Min 0.4 - - - - - - - Typ 1.0 660 20 1.65 80 50 5.0 80 Max - - - 2.0 - - - - Unit mcd nm nm V pF ns nA degrees Note 2. As measured with a Photo Research Corp. "SPECTRA" Microcandela Meter (Model IV-D) Note 3. The axis of spatial distribution are typically within a 10 cone with reference to the central axis of the device. Note 4. Luminous intensity guaranteed to a 2.5% AQL inspection plan. .250 (6.35) Min .100 (2.54) .020 (.508) .025 (0.65) Green Mark Indicates Cathode (-) .085 (2.18) .038 (0.98) R .055 (1.4) .015 (0.39) .010 (.254) 15 .095 (2.42) |
Price & Availability of NTE3001
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |